AVOTurboworld's BRZ/FRS/86GR Unequal Ceramic Coated Exhaust Manifold for NA performance upgrades.
In our initial testing with the Subaru BRZ 2022 FA24 fitted with the AVO 2.5-inch Front Pipe and Cat Back Exhaust system we gained 8hp and 10fp torque.
By adding our bolt on replacement header with our 2.5-inch crossover pipe we gained an additional 10hp and 10fp torque.
From the standard vehicle making 223hp and 190fp torque. By installing the AVO Unequal Ceramic Coated Exhaust Manifold combined with the AVO 2.5inch Crossover Pipe / Front Pipe with Cat / Cat Back Exhaust System we gained 18hp and 20fp torque over the stock figures without an ECU tune.
Check out or Blog at AVO Turboworld.com for the before and after DYNO data.
The Unequal Ceramic Coated Exhaust Manifold kit contains:
1 x Stainless 304 2mm Thick Ceramic Coated Exhaust Manifold
1 x Stainless 2.5inch Exhaust Gasket
2 x 10mm Bolts
2 x 10mm Washer
2 x 10mm Nut
2 x Stainless Exhaust Manifold Gaskets
6 x 10mm Inconel Manifold Base Stud
6 x 10mm Stainless Washer
6 x 10mm Stainless Lock Nut
This Product Fits These Vehicles:
-All BRZ, FRS & 86 GR Models from 2012on FA20 and FA24 engines
NOTE: If vehicle is Running Stock ECU Tune a 02 Sensor 90deg adatptor is required to prevent DTC errors
This Header is designed for Race use only